Tubing Connectors and Fittings
Chemglass Life Sciences Adapter, Connecting, 29/42 Top Outer, 45/50 Lower Inner, Reducing
Adapter, Connecting, 29/42 Top Outer, 45/50 Lower Inner, Reducing. Used to connect dissimilar standard taper joint sizes. Lower inner joint is larger in size than the top outer joint.
Chemglass Life Sciences Adapter, Connecting, 10/30 Top Outer, 14/20 Lower Inner, Reducing
Adapter, Connecting, 10/30 Top Outer, 14/20 Lower Inner, Reducing. Used to connect dissimilar standard taper joint sizes. Lower inner joint is larger in size than the top outer joint.
Chemglass Life Sciences Adapters, Inlet, 24/40 Inner Joint, Straight Swagelok, for 1/2" Compression Adapters
Adapter, inlet, inner joint, straight. Joint Size: 24/40, Overall Length (mm): 90. Allows PTFE tubing to be connected to apparatus for introduction of vacuum or pressure. 1/2" OD ground swagelock is designed for use with a standard 1/2" TFE, PFA, or polypropylene compression fitting.
Chemglass Life Sciences 24/25 Inner Joint, Medium Length, on 22mm OD x 1.8mm W tubing
Standard taper ground inner joint, medium length. 24/25 Inner Joint, Medium Length, on 22mm OD x 1.8mm W tubing.
Chemglass Life Sciences Adapter, Thermometer, Inlet, 45/50 Inner Joint, 95mm Height, #15 Chem-Thread
Adapter, Thermometer, Inlet, 45/50 Inner Joint, 95mm Height, #15 Chem-Thread. Adapter has a #7 or #15 Chem-Thread at the top for vacuum tight seal of plain stem thermo-meters or any other tube having an O.D. between 4 and 7mm. Supplied complete with a Celcon compression cap and Viton o-ring.
Chemglass Life Sciences Adapter, Vacuum Take-Off, Vertical, 14/20 Joint Size
Adapter, Vacuum Take-Off, Vertical, 14/20 Joint Size. With standard taper top outer and lower inner joints with sealed in drip tip. Serrated hose connection has an O.D. of 10mm at the largest serration for connection to vacuum source.
Chemglass Life Sciences Adapter, Thermometer, Inlet, 29/42 Inner Joint, 85mm Height, #7 Chem-Thread
Adapter, Thermometer, Inlet, 29/42 Inner Joint, 85mm Height, #7 Chem-Thread. Adapter has a #7 or #15 Chem-Thread at the top for vacuum tight seal of plain stem thermo-meters or any other tube having an O.D. between 4 and 7mm. Supplied complete with a Celcon compression cap and Viton o-ring.
Chemglass Life Sciences 24/25 Outer Joint, Medium Length, on 28mm OD x 2mm W tubing
Ground Joint, Outer, Medium Length. 24/25 Outer Joint, Medium Length, on 28mm OD x 2mm W tubing.
Chemglass Life Sciences Adapter, Claisen, 45/50 Joint Size, 240mm H x 180mm W
Adapter, Claisen, 45/50 Joint Size, 240mm H x 180mm W. With outer standard taper joints on both top arms and lower inner joint. All three joints are the same size.
Chemglass Life Sciences 35/20 Ball Joint, Clamp Size: 35, Tubing OD: 21.70-22.30mm
35/20 Ball Joint, Clamp Size: 35, Tubing OD: 21.70-22.30mm. Made to ASTM Specifications E677. See CG-145-B and CG-150 for clamps.
Chemglass Life Sciences Sleeve, PTFE, Medium Length, 19/22 Joint Size
Sleeve, PTFE, Medium Length, 19/22 Joint Size. Reusable .005in thick PTFE sleeve for standard taper joints provides a grease-free seal.
Chemglass Life Sciences Inner Luer Joint, on 6.5mm OD x 1.0mm ID Capillary
Inner Luer Joint, on 6.5mm OD x 1.0mm ID Capillary. Inner joint manufactured to the same specifications found on medical and research syringes. Complies with Federal Specification CG-S-921b and USAST Standard Z70.1. Available tooled on three tubing sizes with the inner diameter being 1mm through the tip of the joint on all three sizes.
Research Products International Corp Y Tubing Connectors for 1/4 Inch Inner Diameter Tubing, 12 per Package
Use these fittings to ensure a tight, secure connection between lengths of tubing having the same inner diameter (I.D.). Multiple barbs per arm provide additional contact between the fitting and the tubing for extra gripping power. Chemical-resistant polypropylene plastic is for use with a wide range of liquids or gases. FDA-grade allow for direct contact with food, drugs, and cosmetics. Fittings are autoclavable.
